Directions for use:
Use only with mobile phone chargers
Plug the adapter in to the wall socket and plug the charger into the adapter. The green LED will light. After a period of stabilisation (1 minute), the adapter will begin monitoring the power used. When the battery is full or the charging device is disconnected, the adapter cuts all power to the charger and the LED will flash red. If the adapter does not detect a drop in power usage, it will automatically shut off after 3 hours.

To reset, unplug adapter, or turn power off at the wall and back on again.

To override the adapter, turn it on, off and on again. The LED will light red continuously and the power will be supplied to any attached device without monitoring or timed cut off. To reset for normal use, turn the power off, wait five seconds and turn on again.
Item number: E2100